laser power density meaning in Chinese
激光功率密度
Examples
- ( 3 ) influence of laser power density on atomic emission intensity is investigated
( 3 )研究了激光的辐射功率密度对libs信号强度的影响。 - After obtaining optimized laser frequency 5hz accepted - pulse - times 10 / second by experiments , laser power density increased little by little is focused on study
实验在优化频率为5hz ，受光次数10次秒时，重点研究了激光能量密度由小到大对晶化性能的影响。 - I find that the crystallization performance is the best at laser power density 300mj / cm2 . it means crystallization degree is the best , grains are the most uniformity and film stress is the least
实验发现在能量密度为300mj cm ~ 2时晶化性能较好，即晶化度最高，晶粒最大且均匀，薄膜应力最小。 - Experimental study on that 1064nm 、 1319nm cw laser irradiate the visible light linear array ccd respectively . with the data of experiment , the thresholds of laser power density that make the ccd saturation , crosstalk and thermal saturation were calculated
通过实验获得了1064nm连续激光使ccd成像系统光饱和、串扰、热饱和的功率密度阈值;分析了线阵ccd的横向光饱和效应;初步证实了可见光ccd对1319nm激光的不响应特性。 - The detectors " major response to the irradiation of in - band light is optical effect , while thermal effect can be seen when the incident laser power density is somewhat higher ; when irradiated by off - band light , the detectors " major response is thermal effect
实验发现，探测器对波段内激光的响应主要表现为光效应，当辐照激光的功率密度比较大的时候，还会有热效应出现；而探测器对波段外激光的响应特性则主要表现为热效应。